M5T thin viscosity
adhesive 
AVAILABLE SIZES:
1oz,$4.00
2oz,$7.00
8oz refill $19.00
DESCRIPTION: Mercury M5T Instant is a
very low viscosity cyanoacrylate and was developed for demanding high
speed wicking applications. Excellent adhesion and cure speed on difficult
to bond plastics and rubbers and contaminated or acidic surfaces.
APPLICATIONS: High performance
wicking and bonding of close-fitting parts including: plastics, rubbers,
metal, wood, leather, fabric and composites to themselves or in various
combinations
USEFUL HINTS/NOTES: Bond time is
extremely fast, align parts prior to assembly. Also for locking parts that
are pre-assembled. |
M300M medium
viscosity adhesive
AVAILABLE SIZES:
1oz,$4.00
2oz, $7.00
8oz refill $19.00
DESCRIPTION: Mercury M300M Instant is
a medium viscosity cyanoacrylate developed for demanding high speed
wicking applications. Excellent adhesion and cure speed on difficult to
bond plastics and rubbers and contaminated or acidic surfaces.
APPLICATIONS: High performance
wicking and bonding of close-fitting parts including: plastics, rubbers,
metal, wood, leather, fabric and composites to themselves or in various
combinations.
USEFUL HINTS/NOTES: Bond time is
extremely fast, align parts prior to assembly. Also for locking parts that
are pre-assembled. |
M1100G
gap filling viscosity adhesive
AVAILABLE SIZES:
1oz, $4.00
2oz,$7.00
8oz refill $19.00
DESCRIPTION: M1100G Instant is a
thick gap filling viscosity that bonds to a wide variety of materials
including wood, paper, cardboard, leather, fabrics, etc. Bond times vary
according to the substrates being bonded but are generally faster than
normal super glues.
APPLICATIONS: Typical applications
include wood trim on furniture, balsa wood bonding for hobbyists, leather
accessories on shoes, fabric bows on shoes and lampshade bonding. Other
features include versatile bonding of most elastomers, metals and
plastics.
USEFUL HINTS/NOTES: On elastomer
bonding and some plastics, residues or release agents on surfaces should
be removed by solvent wipe. |
M100F
foam compatible adhesive
AVAILABLE SIZE: 1oz $11.00
DESCRIPTION: M100F is a Foam
Compatible, low odor and lower to medium viscosity cyanoacrylate that
provides a "low bloom" cure on plastics and other materials.
APPLICATIONS: Normally used where
cosmetic requirements dictate an invisible bond without the problem of
whitening or blooming. Can also be used on various foams and costume
jewelry fabrication where fine, close up work dictates the use of a low
odor, more user friendly product.
USEFUL HINTS/NOTES: Bonding can be
immediate so careful, speedy alignment of parts can be required.
|
M1000F
foam compatible adhesive
AVAILABLE SIZE: 1oz $11.00
DESCRIPTION: M1000F is a Foam
Compatible, low odor and medium to gap filling viscosity cyanoacrylate
that provides a "low bloom" cure on plastics and other
materials.
APPLICATIONS: Normally used where
cosmetic requirements dictate an invisible bond without the problem of
whitening or blooming. Can also be used on various foams and costume
jewelry fabrication where fine, close up work dictates the use of a low
odor, more user friendly product.
USEFUL HINTS/NOTES: Bonding can be
immediate so careful, speedy alignment of parts can be required. |
M3500FL flexible adhesive
AVAILABLE SIZES: 1oz $7.00
DESCRIPTION: M3500FL is a
rubber-toughened cyanoacrylate adhesives that will display excellent peel
and impact strength and is well suited to applications involving
vibration, thermal shock, temperature cycling and high humidity
APPLICATIONS: Specially formulated to
provide more flexible bonds than standard cyanoacrylates. This product can
be used up to 105°C and have intermittent temperature resistance up to
125°C. It can be used to bond a wide variety of substrates including
metals, plastics, rubbers, etc.
USEFUL HINTS/NOTES: Cured M3500FL may
be removed from most substrates, and parts disassembled, with M68DB
debonder. Note that It is not possible to fully remove cyanoacrylate from
fabrics. |
M100XF
High Performance ARF CA
AVAILABLE SIZES: 1oz $8.00
DESCRIPTION: M100XF is the result of
nearly 2 years of lab work by Mercury Chemist. This work has resulted in a
formulation that is among the fastest, strongest and highest quality ever
available. M100XF is formulated with Mercury proprietary ingredients that
make it a great choice for tough to bond substrates. M100XF is a 100 cps
and sets in 5 to 15 seconds and has minimal gap filling qualities and
excellent wetting out features.
APPLICATIONS: High performance
bonding of close-fitting parts including: plastics, rubbers, metal, wood,
leather, fabric and composites to themselves or in various combinations.
USEFUL HINTS/NOTES: Bond time is
extremely fast, align parts prior to assembly. Also for locking parts that
are pre-assembled. |
MH16
Accelerator
AVAILABLE SIZES: 2oz pump,$4.00
DESCRIPTION: Mercury MH16 is a
General Activator accelerator. It is ozone friendly and used for normal
curing of cyanoacrylates, depositing a correct balance of neutralizing
ions on the surface, stimulating attrition for the adhesive and preparing
the surface for bonding.
APPLICATIONS: Mercury MH16 is
primarily designed for fast cure of thick deposits or for post curing
outside the bond line. MH16 prevents absorption of the lower viscosity
superglues into porous items. MH16 helps bridge gaps which decrease
polymerization time.
USEFUL HINTS/NOTES: Mercury MH16 can
be used to speed cure by brushing or spraying onto the surface, applying
drop wise, the superglue and then over spraying to cure fillets such as on
wire tacking jobs. Works best under repeated applications rather than one
excessively large application |
M68DB
Debonder
AVAILABLE SIZES: 2oz pump $4.00
DESCRIPTION: Mercury M68DB is a
debonder especially formulated for Mercury CA adhesives. It is a clear
liquid with a relatively low evaporation rate that attacks and dissolves
cured or uncured Instant Superglue (cyanoacrylate).
APPLICATIONS: Can be used to debond
misaligned parts or clean up excess adhesive. It also is useful for
removing spilled adhesives from work area. Debonds accidentally bonded
skin.
USEFUL HINTS/NOTES: Mercury M68DB
Debonder works best under repeated applications rather than one
excessively large application. Apply debonder, allow it to dissolve
hardened superglue and repeat as necessary. Use in an inconspicuous area
for testing. May attack certain plastics and remove paint or varnish. |
Mercury Caddy
Internet special $60.00
The Mercury Caddy is a unique and
revolutionary new product that is changing the way builders are able to
organize their adhesives. The Caddy ships complete in a single box that
contains one bottle of each of the 1 oz Mercury CA's and thread lockers as
well as the DB68 Debonder and MH16 Accelerator.
the caddy comes as all laser
cut parts and is designed for you to take it home and assemble with your
new Mercury Adhesives glue. The Mercury M100XF high performance is
especially suited for the assembly as the Caddy is constructed from laser
cut lite ply. The Caddy will easily fit on any workbench as well as into
most flight or field boxes.
The caddy Package contains:
Mercury Caddy, M5T 1oz, M300M 1 oz, M1100G 1 oz, M100XF 1oz, M3500FL 1oz,
M100F 1oz, M1000F 10z, 4 pack assorted Thread locks |
Internet special $7.00
MTL222 PURPLE (Lite) thread locker
MTL242 BLUE thread locker thread locker
ML271 RED thread locker thread locker
MRT09 GREEN retaining compound thread locker
AVAILABLE SIZES: 1ml Pipette, This product comes in a 4 pack assortment.
DESCRIPTION: Mercury MLT222 Purple Lite Thread locker is a general
purpose, medium-high strength, thixotropic anaerobic thread locker. The
product cures when confined in the absence of air on close-fitting metal
surfaces.
APPLICATIONS: MLT222 is formulated to lock all metric and imperial nuts
and bolts, preventing vibration loosening and leakage through the threads.
MLT222 is slightly oil tolerant, so it will bond some ‘as received’
parts, but best results are obtained with clean substrates. The
thixotropic nature of the product prevents run off, dripping and migration
after assembly. MLT222 is typically used on mounting bolts, housing
screws, etc. MLT222 prevents corrosion of assembly parts.
USEFUL HINTS/NOTES: The higher viscosity material can create a thick film
when bonding uneven surfaces or large gaps.
MLT242 Blue
DESCRIPTION: Mercury MLT242 Thread locker is a general purpose,
medium-high strength, thixotropic anaerobic thread locker. The product
cures when confined in the absence of air on close-fitting metal surfaces.
APPLICATIONS: MLT242 is formulated to lock all metric and imperial nuts
and bolts, preventing vibration loosening and leakage through the threads.
MLT242 is slightly oil tolerant, so it will bond some ‘as received’
parts, but best results are obtained with clean substrates. The
thixotropic nature of the product prevents run off, dripping and migration
after assembly. MLT242 is typically used on mounting bolts, housing
screws, etc. MLT242 prevents corrosion of assembly parts.
USEFUL HINTS/NOTES: The higher viscosity material can create a thick film
when bonding uneven surfaces or large gaps.
ML271 Red
DESCRIPTION: Mercury MLT271 Red is a single component, high strength
(permanent) anaerobic thread locker. TL71 cures when confined in the
absence of air between close-fitting metal surfaces.
APPLICATIONS: MLT271is formulated to lock metal fasteners thus preventing
vibration loosening and leakage through the threads. MLT271 is
particularly suitable for larger threaded fasteners, e.g. studs and all
applications where maximum strength is needed. MLT271 prevents corrosion
of assembly parts.
USEFUL HINTS/NOTES: The higher viscosity material can create a thick film
when bonding uneven surfaces or large gaps. The Application of heat may be
required to assist in removal of parts.
MRT09 retaining Compound
DESCRIPTION: Mercury MRT09 Retaining Compound is a single part, low
viscosity, fast curing anaerobic resin used for bonding rigid assemblies
of all types. It can also be used effectively to increase the strength of
most mechanical assemblies.
APPLICATIONS: MRT09 locks keys and splines. Eliminates backlash in worn
assemblies. Locks bearings in place, preventing spin-out. Bonds rotor to
shafts in fractional and sub fractional horsepower motors. Locks bushings
and sleeves in housings and on shafts. Augments press fits. Restores the
fit to worn assemblies or out-of-tolerance parts.
USEFUL HINTS/NOTE: This lower viscosity product is recommended for
interference or close fitting parts where large gap filling is not
required.
|
Teflon Applicators Tips
These are great for applying CA
into areas where you can not normally reach. The unique Teflon design
continues the Mercury Adhesives tradition of extremely high quality
products with unique and functional dispensers that resist cloging.
Teflon Tips ship four (4) to a pack and are color coded in four gauges.
Pink is 18 gauge and can be used with thick formulas like M3500FL$4.00
Yellow is 20 gauge and can be used with gap filling formulas like M1100G$4.00
Black is 22 gauge and can be used with med formulas like M300M$4.00
Red is 24 gauge and can be used with very thin formulas like M5T.$4.00
Also available in an assortment pack with one of each gauge.$4.00
|
